Если сетевая карта на Intel Galileo не активированна, то сделать это с помощью скетча для Arduino

#include <SPI.h>

#include <Ethernet.h>

// Enter a MAC address for your controller below.

// Newer Ethernet shields have a MAC address printed on a sticker on the shield

byte mac[] = {

0x98, 0x4F, 0xEE, 0x00, 0x66, 0x74 };

// Initialize the Ethernet client library

// with the IP address and port of the server

// that you want to connect to (port 80 is default for HTTP):

EthernetClient client;

void setup() {

// start the serial library:

Serial.begin(9600);

// start the Ethernet connection:

if (Ethernet.begin(mac) == 0) {

Serial.println("Failed to configure Ethernet using DHCP");

// no point in carrying on, so do nothing forevermore:

for(;;)

;

}

// print your local IP address:

Serial.println(Ethernet.localIP());

}

void loop() {

}

Sketch Update the static ip

void setup()

{

// put your setup code here, to run once:

system("telnetd -l /bin/sh"); //Start the telnet server on Galileo

system("ifconfig eth0 169.254.1.1 netmask 255.255.0.0 up");

}

void loop(){}